Cisco Catalyst 9200 48-Port Partial PoE+ Switch, Network Advantage (C9200-48PL-A) – Layer 3 Managed

The Cisco Catalyst 9200 48-Port Partial PoE+ Switch, Network Advantage (C9200-48PL-A) is a Layer 3 managed PoE switch with 48x Gigabit RJ45 (partial PoE+) and modular uplinks (network module slot). It supplies Partial PoE+ power for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers. Management features help segment and prioritise network traffic.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Catalyst 9200 48-Port Partial PoE+ Switch, Network Advantage (C9200-48PL-A) delivers Partial PoE+ power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 48x Gigabit RJ45 (partial PoE+). Uplinks: Modular uplinks (network module slot). PoE: Partial PoE+.

Management and Installation

Routes between VLANs and subnets directly on the switch. Installs cleanly in standard network racks and cabinets. Network Advantage licence and Cisco IOS XE.

Setup Instructions

How to Set Up the Cisco Catalyst 9200 48-Port Partial PoE+ Switch, Network Advantage (C9200-48PL-A)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.