Cisco Catalyst 9200CX 8-Port Compact PoE+ Switch (C9200CX-8P-2X2G) – 8x PoE+, Layer 3 Managed

The Cisco Catalyst 9200CX 8-Port Compact PoE+ Switch (C9200CX-8P-2X2G) is a Layer 3 managed PoE switch with 8x Gigabit PoE+ and 2x 10G SFP+ + 2x 2.5G multigigabit uplinks. It supplies 8x PoE+ power for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers. Management features help segment and prioritise network traffic.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Catalyst 9200CX 8-Port Compact PoE+ Switch (C9200CX-8P-2X2G) delivers 8x PoE+ power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit PoE+. Uplinks: 2x 10G SFP+ + 2x 2.5G multigigabit. PoE: 8x PoE+. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Routes between VLANs and subnets directly on the switch. Mounts under desks, on walls or behind screens. Cisco IOS XE and Fanless compact design.

Setup Instructions

How to Set Up the Cisco Catalyst 9200CX 8-Port Compact PoE+ Switch (C9200CX-8P-2X2G)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.