Networking
Shop all 590 products
Add 8GB of DDR5 and unlock dual-channel performance in a newer laptop.
The Crucial CT8G48C40S5 is an 8GB DDR5-4800 SODIMM for laptops and mini PCs built on Intel 12th Gen or newer and AMD Ryzen 6000 or newer platforms. It is ideal for adding a second module to an 8GB single-stick system, enabling dual-channel bandwidth at a low 1.1V.
Why DDR5 Laptops Need Two Modules
Many DDR5 laptops ship with one 8GB module to cut cost. Each DDR5 module has two independent 32-bit subchannels, but a single stick still leaves half of the laptop’s memory channels empty.
Adding this 8GB module brings the system to 16GB in dual channel. That doubles available bandwidth, which directly improves Intel Iris Xe and AMD Radeon integrated graphics and reduces stutter when many apps are open.
DDR5 runs at 1.1V, lower than DDR4’s 1.2V, and each module carries its own power management IC for cleaner voltage regulation.
DDR5 Efficiency for Thin Laptops
The lower operating voltage and on-module power regulation help reduce heat in thin chassis, while on-die ECC corrects internal DRAM bit errors as part of the DDR5 standard.
Backward Speed Support
On platforms that run DDR5 at different speeds, the module runs at the highest speed both the laptop and the module support.
How to Install the Crucial 8GB DDR5 SODIMM
- Turn off the laptop, unplug the charger, and disconnect the internal battery if your service manual recommends it.
- Remove the bottom cover and locate the DDR5 SODIMM slots; release any existing module by spreading the clips.
- Insert the module at an angle with the notch aligned, then press down until it locks.
- Power on. The first DDR5 boot can take longer while the system trains memory; then confirm capacity and speed in BIOS or Task Manager.
