TP-Link TL-FM531 10GBASE-T SFP+ RJ45 Transceiver (TL-FM531) – 30m, Copper

The TP-Link TL-FM531 10GBASE-T SFP+ RJ45 Transceiver is a 10GBASE-T SFP+ module for copper links up to 30m. It connects switches, servers and storage over standard copper cabling. It uses an RJ45 connector. It is hot-swappable for quick installation. Check host compatibility before ordering.

Plug in, link up.

High-Speed Copper Links Through SFP Ports

Many switches offer only SFP ports, while servers and NAS use RJ45 or short in-rack links.

The TP-Link TL-FM531 10GBASE-T SFP+ RJ45 Transceiver provides 10G (multi-rate 1G/2.5G/5G/10G) over copper up to 30m, plugging straight into a compatible port.

Connection Specifications

Form factor: SFP+. Speed: 10G (multi-rate 1G/2.5G/5G/10G). Media: Copper. Reach: 30m. Connector: RJ45.

Installation and Compatibility

Insert the module into a matching port until it clicks, then connect the cable. Some hosts limit which copper modules they accept, so check the compatibility list.

Setup Instructions

How to Install the TP-Link TL-FM531 10GBASE-T SFP+ RJ45 Transceiver

1. Check that the host port supports this module type and speed.
2. Remove the dust cap and insert the module until it latches.
3. Connect the fiber or copper cable.
4. Confirm the link LED and port status in the switch or device interface.