TP-Link TL-SG105PE 5-Port Gigabit Easy Smart Switch with 4-Port PoE+ (TL-SG105PE) – 65W PoE

The TP-Link TL-SG105PE 5-Port Gigabit Easy Smart Switch with 4-Port PoE+ (part number TL-SG105PE) is an easy smart managed PoE switch with 4x Gigabit PoE+ + 1x Gigabit RJ45. It supplies 4x PoE+ power from a 65W budget for access points, IP cameras and VoIP phones. It is built for small offices that want basic control without complexity.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link TL-SG105PE 5-Port Gigabit Easy Smart Switch with 4-Port PoE+ delivers 4x PoE+ power from a 65W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 4x Gigabit PoE+ + 1x Gigabit RJ45. PoE: 4x PoE+, 65W budget.

Management and Installation

VLANs, QoS and IGMP snooping through a simple web interface or app. Fits on a desk or shelf, or mounts on a wall.

Setup Instructions

How to Set Up the TP-Link TL-SG105PE 5-Port Gigabit Easy Smart Switch with 4-Port PoE+

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.