Networking
Shop all 595 products
Samsung B-die 64GB RDIMMs for dense DDR4 server builds.
The Samsung M393A8G40BB4-CWE is a 64GB DDR4-3200 ECC Registered DIMM using Samsung’s B-die 16Gb DRAM. It suits data center teams building or expanding Intel Xeon Scalable and AMD EPYC servers for virtualization, private cloud, VDI, and other memory-intensive enterprise applications.
Why Memory Capacity Limits Server Workloads
Virtualization hosts, database servers, and in-memory analytics platforms usually run out of memory before they run out of CPU. Every virtual machine and cache reserves RAM, so adding memory is often the fastest way to fit more workloads on the same hardware.
ECC Registered DIMMs are designed for this job. ECC corrects single-bit errors on every access, protecting long-running workloads from silent data corruption. The register chip buffers command and address signals, reducing electrical load so servers can run more DIMMs per channel.
This 2Rx4 module runs at 3200 MT/s and 1.2V, the top standard speed for DDR4 RDIMMs, and fits standard 288-pin server slots.
Built for Private Cloud and Virtualization
Dense 64GB modules let private cloud hosts run more virtual machines per server, improving consolidation and reducing the number of physical nodes.
Consistent Die Revision for Fleets
Standardizing on one Samsung part number and die revision across servers simplifies validation and spares management.
How to Install the Samsung 64GB Server Memory
- Shut down the server, disconnect all power cords, and wear an anti-static wrist strap.
- Open the chassis and follow the vendor’s DIMM population guide so channels are balanced across each processor.
- Align the module notch with the slot key and press evenly until both ejector latches lock.
- Power on, allow memory training to finish, and confirm capacity, speed, and ECC status in BIOS or the management controller (iDRAC, iLO, XClarity, IPMI).
