Micron 16GB DDR4-2933 Non-Volatile Memory (NVDIMM) (MTA18ASF2G72XF1Z) – 1Rx4, PC4-23400

The Micron 16GB DDR4-2933 non-volatile module is designed for servers and data-centre systems that need error-correcting memory. Its ECC design helps keep data accurate under continuous load. Speed is rated at 2933 MT/s. Installation takes only a few minutes. Check your system’s supported memory list before ordering.

Stable memory for always-on systems.

Reliable Memory for Always-On Servers

Servers running databases, virtual machines and file services need memory that can run around the clock; a single uncorrected memory error can crash an application or corrupt data.

This 16GB DDR4-2933 NVDIMM uses ECC to detect and correct single-bit errors.

Specifications That Match Your System

Key specs: DDR4, 2933 MT/s, PC4-23400, 288-pin, NVDIMM, 1Rx4, 1.2V. Match the memory type, form factor and speed your system supports.

Error Correction and Stability

ECC memory corrects single-bit errors automatically, which helps prevent crashes and silent data corruption in systems that run around the clock.

Setup Instructions

How to Install the Memory

1. Power down the system, unplug all power cords and use an anti-static wrist strap.
2. Check the system’s memory population guide for the correct slots and channel order.
3. Insert each module, aligning the notch, until both retention clips lock.
4. Power on and confirm the memory is detected in the BIOS or system management interface.