Networking
Shop all 595 products
The Optoma GT2000HDR is a compact 1080p short throw projector with a 3,500-lumen laser light source. It targets home entertainment and gaming in small rooms, casting a 120-inch image from just over four feet while its 30,000-hour laser removes lamp changes and warm-up delays.
Deep-Dive Story & Problem/Solution
Lamps Fade, and Small Rooms Leave No Space for a Long Throw
Lamp-based projectors lose brightness steadily and typically need a new lamp after a few thousand hours. They also take time to warm up and cool down, which discourages casual use. In a small room, the long throw distance compounds the problem.
The GT2000HDR replaces the lamp with a laser phosphor light source rated for 30,000 hours. It reaches full brightness almost immediately, tolerates frequent on/off cycles, and draws only about 139W, well under half the power of comparable lamp models.
Its 0.50:1 lens means distance equals half the image width. Set the 6.6 lb unit on a coffee table and it fills a wall, with nobody walking through the beam. Horizontal and vertical keystone allow for off-center placement.
Laser Brightness From a Short Distance
3,500 lumens with a 300,000:1 dynamic contrast ratio produces a punchy 1080p image, and HDR10 and HLG compatibility lets 4K HDR sources play correctly. A low-latency mode brings input lag down to 8.6ms for gaming.
Small, Efficient, and Maintenance-Free
The sealed laser engine has no lamp and no filter to service. A built-in 15W speaker is loud enough for casual movie nights, and the compact body makes backyard or travel use realistic.
Setup Instructions
How to Set Up the Optoma GT2000HDR
- Place the projector about 4 to 5 feet from the wall or screen, centered horizontally.
- Connect the external power supply, then attach your source to either HDMI 2.0 input.
- Power on and focus manually; correct any skew with horizontal and vertical keystone.
- Select a picture mode and turn on the gaming mode when playing to reduce input lag.
Reviews
There are no reviews yet.